Description:

Used HOLZ-HER Triathlon 1425 Edgebander (1996)

!! MAKE OFFER !!

- cartridge glue
- end trim
- rough trim
- fine trim
- scraper
- corner rounder
- jump buffing

SPECIFICATIONS for Holz-Her Model 1425 - 300 Triathlon Series Edgebander

FEATURES:
- Feed speed of 8 or 16 meters per minute (mpm)
- Full Programmable Logic Controller
- Heavy duty feed motor with feed chain guide for smooth workpiece advance.
- Pressure beam with double sided and centralized height adjustment by use of a hand
wheel. Indexing by a scale or by a guide bar.
- Wide workpiece support area.
- Safety enclosure of all cutting areas with electronic lockout.
- Central dust extraction outlet.

Equipped with the following units:

MODEL 1901 EDGESTRIP MAGAZINE
- 1 (one) universal magazine for solid edges, strips, and coiled material.
- Utilizes motion detector to ensure accurate, trouble-free positioning of edge material.
- Exclusive “TRACTOR-BELT FEED SYSTEM” to ensure accurate, trouble-free feeding of edge material, as well as optimum operator safety.
- Angled strip gate to prevent double feeding of strips.
- Magazine table on rollers for smooth feeding of coiled material.
- Edge guide equipped with automatic guillotine lock-out for safety.
- “3 DEGREE APPROACH ANGLE” allows easy feeding of large wood edges.
- Automatic guillotine for coiled material up to 4.0 mm.

MODEL 1906 GLUING STATION - “CARTRIDGE SYSTEM”
- Equipped with HOLZ-HER'S exclusive patented "CARTRIDGE" glue system. This is a CLOSED APPLICATION SYSTEM in which the glue is enclosed in an air- tight chamber and cannot oxidize, discolor, burn, or become contaminated with wood dust.This allows for optimum glue adhesion.
- Glue applied to panel by patented GLUE NOZZLE from 6-60mm workpiece thickness.
- Precise control of all functions including begin and end of glue line, height of glue line, bottom of glue line, volume of glue and face melt temperature.
- Less maintenance - no glue pot to clean, fewer parts.
- Efficient glue consumption - virtually no waste.
- Efficient power consumption - uses less than half that of conventional glue pots.
- Fastest & easiest glue color change, 5-10 min.
- Fastest heat-up time in the industry, 3-5 min.
- No fumes or other environmental hazards.
- Machine can be used for trimming without heating up the glue section.

MODEL 1914 PRESSURE SECTION
- Large electronically driven pressure roller perfectly synchronized with the workpiece and feed speed.
- Three additional rollers, two cantered with conical design providing high pressure and precise bonding.
- Dual function for solid wood applications by means of a lever.
- Quick adjustment of thickness’ by a dial caliper.

MODEL 1916.1 END-TRIMMING UNIT AUTO SWIVEL
- End Trim Unit complete with motors running on solid, polished bars with linear bearings and heavy rigid motor mounts for precision trimming.
- “Uni-Point” swivel system for quick change from flush to bevel trimming without adjustments for blade changes.
- With electro-pneumatic shifting of the motors from 0 to 10 degrees at the control panel.
- With 2 TCT saw blades (Diameter 160 x 30 x 3.2 mm, 24 teeth).
- With retreat action for a reduced workpiece interval.
- With 2 x 0.55 KW motors, 230 V, 60 HZ. (1.5 HP)
- Cutting Speed = 6,600 RPM.
- Includes 3 Siko digitals for quick set-up.

MODEL 1920 TOP & BOTTOM FLUSH TRIM STATION
- Two (2) motors turn precision belt-driven spindles for efficient power transmission and smooth cutting.
- Combination carbide flush and bevel cutters for quick changes (0 and 15 degrees chamfer).
- Can be equipped with horizontal and vertical copy shoes and radius heads (2,3,5mm) when used as a second or “fine-trim” station.
- Equipped with digital readouts for all adjustment spindles (5) for quick set-up.
- Can be equipped with straight knife cutterheads for trimming 1” solid lumber.
- All cutterheads are “insert carbide” to ensure accuracy, repeatability, and ease of set-up.
- Cutter Speed = 14,400 RPM
- 2 x 1.1 KW motors, 230 V, 60 HZ.

MODEL 1920 TOP & BOTTOM “SUPERFINISH” TRIM UNIT
- Identical to unit provided as standard equipment on Model 1920 Top & Bottom Trim Unit.
- Horizontal & vertical copy shoes and radius heads when used as second/“fine-trim” station.
- Standard cutterhead of 3mm radius. Radius capability of up to 8mm upon request.
- Equipped with five digital readouts for all adjustment spindles.
- 4 TC reversible knife cutterheads.
- All cutterheads are “insert carbide” to ensure accuracy, repeatability, and ease of set-up.
- Air jets for continuous panel cleaning ensures smooth trim cut.
- 2 x 1.1 KW motors, 230 V, 60 HZ.

MODEL 1944 PLUNGE BUFFING UNIT
- Includes two motors with the possibility of adjustment in any direction.
- Incorporates “plunge control” to avoid rounding-over the leading and trailing edges, and ensure tight corners (thick PVC).
- Vertical Tilt = 0 to 45 degrees.
- Horizontal Swivel = 0 to 20 degrees.
- Cloth buffing wheels for smoothing the sharp edges of thin PVC band after trimming.
- Can be equipped with fine sanding wheels for finishing wood and laminate edges.
- Motor Speed = 1440 RPM.

PROGRAMMABLE LOGIC CONTROL (P.L.C.)
- Ability to program all edgebander functions including: edge feed, glue application, end trimming, flush trimming, radius trimming, and buffing.
- Programs can be easily created and recalled at will.
- Screen with graphic interface makes programming easy.
- A picture of each unit may be brought up on the screen to show the operator the status of the unit and the parameters which can be programmed.
- Virtually eliminates set-up time by merely selecting and loading a program, which automatically activates all required edgebander functions simultaneously.
- Each program clearly indicates on screen the units included and their exact settings.
- Programs can be modified easily to create new programs.
- Edgebander can be operated manually when required, without necessity to write a program.
- Eliminates use of limit switches and their normal adjustments related to work station activation along the feed track.
- Error messages are presented in plain text, to avoid the need for endless error code lists.
- Eliminates many mistakes caused by lack of operator skill.

TECHNICAL DATA:
- Operating System Hot-Cold one side LH
- Edgestrip Thickness 0.4 to 20 mm = 0.016 to 3/4 in.
- Edgestrip Height Max. 66 mm = 2 5/8 in.
- Panel Length Min. 7.0 in.
- Feed Speed 26 and 52 FPM
- Compressed Air Required 90 PSI @ 3 CFM
- Connected Load 50 Amps at 230 V. 3 phase

SPACE REQUIRED:
- Length 174”
- Width 40 in.
- Height 54 in.

STANDARD EQUIPMENT:
- Set of (2) TCT End Trim Saw Blades.
- Set of (2) TCT Cutters for 1st top/bottom trimmers.
- Set of (2) TCT Cutters for Superfinish trimmers.
- Set of (2) Buffing Wheels for Buffers.
- Tool kit and owners manual.
- Central Dust Collection Manifold.
- Sound/Dust protection hood covering all machining stations.